keskiviikko 22. helmikuuta 2012

WOYWW 142 - Birthday tutorial and giveaway!!! Synttäri ohjeet ja arpajaiset!!!

It´s wednesday and it´s my Birthday :)
As kind of a birthday present I´ll give you a tutorial (or in fact two) of the altered bobbin I have here on my desk.
You also have a chance to win the bobbin. You need to be my follower and leave a comment to this post.

To see what others have, go to Julia´s Stamping Ground and you´ll find - I guess - about 200 more desks... Big thanks to Julia for hosting this gathering!


Keskiviikko ja mun synttärit :)
Eräänlaisena synttärilahjana tässä teille ohjeet tuunattuun lankarullaan.
Lankarullan voit myös voittaa itsellesi jos olet lukijani ja jätät kommentin tähän postaukseen.



Lisää työpöytiä löytyy Julian blogista Stamping Ground!





This is where it begun: I inherited from my mother a huge amount of bobbins - mostly plastic ones. Some of them do not have much yarn left. But nothing can be thrown away...

Tästä se lähti: Perin äidiltäni ison määrän lankarullia - enimmäkseen muovisia. Osassa ei ollut paljoakaan lankaa jäljellä. Mutta mitäänhän ei voi heittää pois...

To save the yarn, I took a piece of brown paper, around which I rolled it.

Säästääkseni langan, otin palan ruskeaa paperia, jonka ympärille kieputin sen.

How to begin: roll the paper and put the yarn between. (bad pic, sorry...)

Aloita näin: rullaa paperi ja laita lanka väliin. (huono kuva, sorry...)

When you have all the yarn around the paper, cut a slit to the paper roll, where to put the end of the yarn.

Kun kaikki lanka on rullalla, leikkaa paperirullaan halkio, mihin saa laitettua langan pään.

So you will get cute little yarn rolls to use in your crafting: cards, art journal, mixed media... Of course you can also use the yarn for stiching, if needed...

Näin sinulla on söpöjä pikku lankarullia askarteluun: kortteihin, art journaliin, sekatekniikoihin... tietysti voit käyttää langat ompeluunkin...


And back to the topic: Now we have empty plastic bobbins. First I sandpapered them a bit. And then I covered them with a couple of layers of gesso.

Takaisin asiaan: Nyt meillä on tyhjiä muovirullia. Ensin hankasin niitä hieman hiekkapaperilla. Sitten sivelin pari kerrosta gessoa.

After the gesso has dried, I coloured the bobbin with Distress inks, sprayed fixative on it and covered it with decoupage lacquer to seal the colour. You can also use acrylic paints.
Labels are from old bobbins. I scanned and printed and cut out them and glued on the bobbin.

Kun gesso oli kuivaa, väritin rullan Distress inkillä, suihkautin fiksatiivia ja laitoin vielä päälle decoupage lakkaa suojaamaan väriä. Voit käyttää myös akryylimaaleja.
Merkit on vanhoista lankarullista. Skannasin, printtasin ja leikkasin ne ja liimasin rullaan.


Then I made the ribbon. The light blue ribbon was not wide enough, so I machine stitched (with zig-zag) two ribbons together.
The text and image are printed with ink jet printer on white ribbon. They are then hand stiched on the blue ribbon. Be sure, that the bottom (blue) ribbon is long enough to go round the bobbin first!
Now you will need a stripe of fabric to cover the back side of the hand stitched area. I machine stiched it and put narrow satin ribbons between the back stripe and the blue ribbon. You need these satin (or other) ribbons to tie the whole ribbon around the bobbin.


Sitten valmistin nauhan. Vaalean sininen nauha ei ollut tarpeeksi leveää, joten ompelin koneella (sik-sakilla) kaksi nauhaa yhteen.
Teksti ja kuvat on printattu mustesuihkutulostimella valkoiselle nauhalle. Ne on ommeltu käsin kiinni siniseen nauhaan. Varmista, että pohjanauha (sininen) on tarpeeksi pitkä ylettyäkseen ensin rullan ympäri!
Nyt tarvitset kangassuikaleen peittämään käsin ommellun alueen takapuolen. Sen ompelin kiinni koneella ja laitoin samalla takakankaan ja sinisen pohjanauhan väliin ohuet satiininauhat. Niitä tarvitaan sitomaan koko nauha rullan ympärille.




Now, when the bobbin and the stripe are both finnished, you can glue the stripe around the bobbin. I used Plastic Padding Repair Extreme -glue.

Nyt, kun sekä rulla että nauha ovat valmiina, voit liimata nauhan rullan ympärille. Minä käytin Plastic Padding Repair Extreme -liimaa.


And when the glue has dried, you can tie the ribbon around the bobbin and you have a nice message to your friend!

Ja kun liima on kuivunut, voit sitoa nauhan rullan ympärille ja sinulla on hauska viesti ystävällesi!

Labels / Merkit
You can also download them HERE.

Voit myös ladata ne TÄÄLTÄ.

32 kommenttia:

  1. Happy, happy birthday. I hope it is as nice as your tutorial. I have often wondered how to get those plastic spools to look like old wood. Now I know. Love this and thanks so much for the tutorial. Have a great WOYWW from #9 this week!

    VastaaPoista
  2. happy birthday! i hope your day is full of fun and laughter. Thanks for the tutorial on the spools - very cool. Another use for gesso (one of the WOYWWrs has a HUGE tub of gesso on her desk).

    Kay
    #29

    VastaaPoista
  3. Haven't seen you in ages, and I miss your creativity! Happy birthday to you!! The tut is wonderful....Love!

    VastaaPoista
  4. What a delightful tiny surprise hidden in the old thread bobbin. Wonderful!

    VastaaPoista
  5. Hauska idea ja minä tykkään kun joku osaa ja oivaltaa kierrätys ideoita. Tuo sinun juttu on ihana ja haluun arvontaan mukaan sekä onnelista syntymäpäivää sinulle.<3

    VastaaPoista
  6. ...Onneksi Olkoon ja Kaikkea Hyvää Elämääsi, tuo idea on tosi kiva, että lankakeränkin voi käyttää noin askartelussa Hienoa!!! olet aivan oikeassa, että mitään ei kannata heittää menemään vaikka paikat sitten pursuisivatkin kaikkea ;) Juu mukaan arvontaan.

    VastaaPoista
  7. Onnea synttärisankarille!
    Taas mahtava taideteos! Ja lankarullasta.
    " Teksti ja kuvat on printattu mustesuihkutulostimella valkoiselle nauhalle."
    Kuinka se onnistuu?
    ....mukana arvonnassa

    VastaaPoista
    Vastaukset
    1. Kiitoksia kaikille onnitteluista :)
      Printtaaminen nauhalle onnistuu siten, että ensin printataan normaalisti paperille, jotta nähdään, mihin kohtaan se tulee. Sitten liimataan kaksipuoleisella teipillä nauha tekstin tai kuvan kohdalle ja paperi nauhoineen uudelleen printteriin SAMOIN PÄIN ja printataan siis uudelleen samaan kohtaan.

      Poista
  8. ...many happy returns...thankyou for sharing your tutorials...Mel :)

    VastaaPoista
  9. Paljon onnea synttärisankarille!:D Ja kiva, omalaatuinen idea tuo lankarulla.:)

    VastaaPoista
  10. Hi Birthday Girl - and happy birthday to you, hope your day is as special as you are.
    Thanks for sharing your bobbin, what a lovely idea - think I am a follower but will check. What a great gift to win for someone.
    Hugs, Neet 33 xx

    VastaaPoista
  11. Happy Birthday Tuire! What a fab tutorial you have given us! I will have to give this a try at some point. Hope you have a lovely day, and thanks for stopping by!

    VastaaPoista
  12. Happy Birthday to you, I hope you have a great day. A fab project, many thanks for sharing :)

    Have a great WOYWW and a fab week, Luv Karen xx

    VastaaPoista
  13. Happy birthday to you, have a fab day, I am already a follower of your blog, Your tutorial is Fabulous, I would love to own the bobbin, I can't wait to have try!!! and thank you for the download also,, Have a great birthday week, Hugs May x x x x

    VastaaPoista
  14. What a transformation with that bobbin. Most of my empty ones get taken by my daughter for crafting with her daughter. Thank you for your visit and lovely comments. have a good week. xx Maggie #11

    VastaaPoista
  15. Happy birthday! Your bobbin alterations are amazing. Enjoy this week's WOYWW snoop around the crafty & creative world. Take care Zo xx 81

    VastaaPoista
  16. Once again Happy Birthday Tuire. I love your cotton reel and I'll certainly print off those round labels... thank you. They look so different to our English ones. Your reel is an unusual special gift.
    Love JoZarty x

    VastaaPoista
  17. happy happy birthday! wow, it's amazing how you got that plastic bobbin look like old wood! hhow did you get the printer to print the words on the ribbon? thanks for the chance to win your birthday giveaway!

    VastaaPoista
    Vastaukset
    1. Printing on the ribbon: first print to a paper sheet, then fasten the ribbon on the text with double sided tape and print again.

      Poista
  18. Very cute, and a belated happy birthday from me :)

    VastaaPoista
  19. Belated happy birthday from me. Your bobbin is cute :)

    VastaaPoista
  20. My goodness Tuire, I would never have guessed that was a plastic bobbin, what a great job you made of it. And...oh sweet friend, how patient you are...re-winding the threads, sewing two pieces of ribbon together...I love that.

    VastaaPoista
  21. Oh, and you got me all animated and I didn't wish you MANY HAPPY RETURNS!!

    VastaaPoista
  22. This world does not rule without women's patience and creativity!

    VastaaPoista
  23. Oikein hyvää synttäriä! Ja upea tutoriaali.

    VastaaPoista
  24. I am a bit late getting around this week but I forgot to post on Wednesday and have been busy all week. Just wanted to make the rounds and remind everyone my blog candy closes on Tuesday night of next week and I will announce winners on Wednesday. Drop by become a follower and leave a comment for a chance to win. Vickie #173

    VastaaPoista
  25. Onnea synttärin johdosta. Romulyylin kautta satuin tänne ja heti halusin asettua taloksi. Tosi kiva, että jaat noin tarkkoja ohjeita askarteluihin :) Osallistun rullan arvontaankin ;)

    VastaaPoista
  26. Onnea vielä täältäkin!!
    Mahtava tutoriaali ja aivan ihana idea! Ja kiitos myös nauhan tulostus vinkistä. Tätä täytyy joskus kokeilla :)

    VastaaPoista
  27. Happy birthday and what a great stash you inherited
    Bridget #54

    VastaaPoista
  28. Hi there Tuire - brilliant tutorial great ideas! thanks so much for popping over, and for sharing. Happy belated WOYWW! Shaz in Oz. x #27

    VastaaPoista
  29. What a brilliant idea for those bobbins ... I LoVe the blue ribbon one and think they would make gorgeous gifts.
    I also like the condolance card ... what a great way to use that paper with the door (I have some that I have never quite known what to do with) ... I love the idea that the person has just slipped through the door and is just in the next room.
    Really love your work Lisaa. Happy WOYWWing. Debbie #89

    VastaaPoista
  30. Hirmuisen myöhäiset Onnittelut ja kiva on tutorialisikin.

    VastaaPoista